Burst Pipes Repair

Encountering problems with pipes is no longer a problem, burst pipes, frozen pipes that burst and any type of burst pipes repair can be done without difficulty if you have the right tools. Next we will give you some basic repair tips.

First thing you need to do is shutting off your water at faucets, stopcock, valves and water heating units. Then empty or drain out any excess water. After that try to find were the pipe burst, or were holes are .Sometimes water tends to run downhill from a break further up, so the hole may not be right over the water leakage puddle.

Sometimes the burst is just a tiny puncture or splice that can be fix with lengths of copper pipe that are threaded at the end, called proprietary slip on couplers. They are easy to find, usually at a hardware store with plumbing supplies for pipes repair.

Next you need to cut away the area with the burst or hole, with a pipe slice, or a pipe cutter. Make sure you cut until you reach a good rounded piping are once again, so you can connect to with your new piece. Be careful not to leave any misshapen damage area behind or the spot will be weak and break in the future.

After you have cut away the broken area, smooth the remaining areas. Then slide olives over the ends on the coupling and compress them to seal the section. Sometimes when the burst area is larger, you will need to use a couple of small compression couplers, on each side of the new area.

For further help, go to your local hardware center that sells plumbing supplies. Also improve by reading library books on burst pipes repair and check on Amazon, an online bookstore. EBay is the largest online auction site that also offers a lot of plumbing supplies and books about burst pipes repair.

« Back